Inox wire
AISI 304 – LEGGERA
ALTEZZE DISPONIBILI mm.
NR. | FILO | LUCE | 1000 | 1300 | 1600 | 2000 |
16 L | 0,28 | 1,456 | X | X | X | |
18 L | 0,28 | 1,263 | X | X | ||
20 L | 0,24 | 1,149 | X | X | X | |
22,5 L | 0,24 | 0,995 | X | X | ||
25 L | 0,24 | 0,871 | X | |||
30 L | 0,2 | 0,726 | X | X | X | |
35 L | 0,2 | 0,594 | X | X | ||
40 L | 0,16 | 0,535 | X | X | X | X |
45 L | 0,16 | 0,457 | X | X | ||
50 L | 0,14 | 0,416 | X | X | ||
55 L | 0,14 | 0,365 | X | X | ||
60 L | 0,12 | 0,343 | X | X | X | |
65 L | 0,12 | 0,307 | X | X | X | |
70 L | 0,12 | 0,277 | X | X | X | |
75 L | 0,1 | 0,27 | X | X | ||
80 L | 0,1 | 0,247 | X | X | X | X |
90 L | 0,1 | 0,209 | X | X | X | X |
100 L | 0,09 | 0,188 | X | X | ||
100 L | 0,1 | 0,178 | X | X | X | X |
110 L | 0,1 | 0,153 | X | X | X | X |
120 L | 0,07 | 0,162 | X | X | ||
130 L | 0,07 | 0,144 | X | |||
140 L | 0,06 | 0,138 | X | X | X | X |
150 L | 0,06 | 0,125 | X | X | X | X |
160 L | 0,06 | 0,114 | X | X | X | X |
180 L | 0,05 | 0,104 | X | X | X | X |
200 L | 0,05 | 0,089 | X | X | X | X |
220 L | 0,05 | 0,076 | X | X | X | X |
250 L | 0,05 | 0,061 | X | X | X | X |
280 L | 0,04 | 0,059 | X | X | X | X |
300 L | 0,04 | 0,053 | X | X | ||
350 L | 0,035 | 0,044 | X | X | X | X |
AISI 304 – FORTE
ALTEZZE DISPONIBILI mm.
NR. | FILO | LUCE | 1000 | 1300 | 1600 | 2000 |
4 F | 1 | 5,945 | X | X | X | X |
5,5 F | 1 | 4,051 | X | X | 1500 | |
6 F | 0,9 | 3,73 | X | X | ||
7 F | 0,8 | 3,169 | X | X | X | X |
8 F | 0,7 | 2,773 | X | X | X | |
9 F | 0,7 | 2,387 | X | X | ||
10 F | 0,6 | 2,178 | X | X | X | X |
12 F | 0,5 | 1,815 | X | X | ||
14 F | 0,5 | 1,184 | X | X | X | |
16 F | 0,45 | 1,286 | X | X | ||
18 F | 0,4 | 1,143 | X | X | 1500 | |
20 F | 0,4 | 0,989 | X | X | X | X |
25 F | 0,35 | 0,761 | X | X | X | |
30 F | 0,32 | 0,606 | X | X | X | |
35 F | 0,28 | 0,514 | X | X | X | X |
40 F | 0,24 | 0,455 | X | X | X | X |
50 F | 0,2 | 0,356 | X | X | X | X |
60 F | 0,18 | 0,283 | X | X | X | X |
70 F | 0,16 | 0,237 | X | X | X | X |
80 F | 0,14 | 0,207 | X | X | X | X |
90 F | 0,12 | 0,189 | X | X | X | X |
100 F | 0,11 | 0,168 | X | X | X | X |
120 F | 0,09 | 0,142 | X | X | X | |
130 F | 0,09 | 0,124 | X | X | X | X |
140 F | 0,08 | 0,118 | X | X | X | X |
Accessories
Iron removers
CODICE CODE | MODELLO MODEL | QUOTE TAMBURO DRUM SIZES mm | PORTATA NOMINALE NOMINAL DELIVERY |
D3650,04 | CM 22,20 | Ø 220X200 | 10 m3/ora |
D3650,08 | CM 22,30 | Ø 220X300 | 16 m3/ora |
D365,12 | CM 22,40 | Ø 220X400 | 20 m3/ora |
D3650,16 | CM 22,50 | Ø 220X500 | 24 m3/ora |
D3650,20 | CM 30,40 | Ø 300X400 | 28 m3/ora |
D3650,24 | CM 30,60 | Ø 300X600 | 38 m3/ora |
D3650,28 | CM 30,80 | Ø 300X800 | 56 m3/ora |
ELETTROMAGNETI A PRESSIONE
The pressure type electromagnetic filters FPL are used for the de-ironizing of enamels and slips and are installed on the outlet of the pumps, with the inlet of the inferior hose fitting avoiding therefore, the failure of electrical energy, the pollution of material already treated.. e liquid contained in the superior container, which The FPL filters run on direct current on a very low tension from the relative switchboard.
CODICE CODE | TIPO TYPE | PORTATA CAPACITY Lit/h | GRIGLIE GRIDS | DIMENSIONI DIMENSIONS mm | PESO WEIGHT Kg | POTENZA POWER W | QUADRO DI COMANDO BOARD PANEL | |||||||
Øi | Øe | s | N° | A | B | C | D | TIPO TYPE | DIMENSIONI DIMENSIONS mm | |||||
D3638,40 | FGL 50 | 2500 | 45 | 142 | 6 | 30 | 330 | 660 | 375 | 2” | 100 | 210 | QE250 | 300x400x150 |
D3638.41 | FPL50P | 2500 | 45 | 142 | 6 | 30 | 385 | 660 | 375 | 2" | 130 | 420 | QE500 | 300x400x150 |
D3638,44 | FGL75 | 6000 | 85 | 203 | 6 | 34 | 385 | 750 | 430 | 3 “ | 130 | 300 | QE400 | 300x400x150 |
D3638,48 | FGL75P | 6000 | 85 | 203 | 6 | 34 | 465 | 860 | 540 | 3” | 185 | 600 | QE800 | 300x400x150 |
D3638,52 | FGL102 | 12000 | 85 | 242 | 6 | 38 | 465 | 840 | 490 | 4” | 210 | 400 | QE250 | 300x400x150 |
D3638.53 | FPL102P | 16000 | 85 | 242 | 6 | 38 | 520 | 835 | 490 | 4" | 300 | 800 | QE250 | |
D3638,56 | FGL 115 | 16000 | 85 | 300 | 6 | 38 | 520 | 950 | 545 | PN6 100DN | 320 | 600 | QE250 | 300x400x150 |
D3638.57 | FPL115P | 24000 | 85 | 300 | 6 | 38 | 620 | 950 | 545 | PN6 100DN | 400 | 1000 | QE250 | 300x500x200 |
D3638,60 | FGL 125 | 24000 | 138 | 345 | 10 | 25 | 570 | 950 | 550 | PN6 100DN | 500 | 800 | QE1100 | 300x400x150 |
D3638,64 | FGL 150 | 34000 | 140 | 400 | 10 | 34 | 660 | 1110 | 720 | PN6 125DN | 630 | 1000 | QE1200 | 300x500x200 |
CODICE CODE | TIPO TYPE | DIM. BELT | DIMENSIONI DIMENSIONS | CURVA | MAX.DIST. | PESO WEIGHT |
D3640.18 | RMP-46-42 | 400/500 | 420x460xH160 mm | D | 160 mm | 160 Kg |
D3640.22 | RMP-46-52 | 500/600 | 520x460xH160 mm | D | 160 mm | 190 Kg |
D3640.26 | RMP-46-62 | 600/700 | 620x460xH160 mm | D | 160 mm | 225 Kg |
D3640.30 | RMP-46-72 | 700/800 | 720x460xH160 mm | D | 160 mm | 262 Kg |
D3640.32 | RMP-46-82 | 800/900 | 820x460xH160 mm | D | 160 mm | 300 Kg |
CODICE CODE | TIPO TYPE | DIM. BELT | DIMENSIONI DIMENSIONS | MAX.DIST. | Kw | VOLT | PESO WEIGHT |
D3642.18 | REP-3 | 500 mm | 500x440xH360 mm | 180 mm | 1,1 | 55x2 | 350 Kg |
D3642.22 | REP-4 | 600 mm | 600x530xH380 mm | 200 mm | 1,5 | 60x2 | 470 Kg |
D3642.26 | REP-5 | 700 mm | 700x600xH410 mm | 240 mm | 2 | 80x3 | 700 Kg |
D3642.30 | REP-6 | 800 mm | 800x700xH410 mm | 270 mm | 3 | 120x3 | 950 Kg |
D3642.32 | REP-7 | 900 mm | 900x800xH410 mm | 300 mm | 4 | 110x3 | 1200 Kg |
Accessories
Filtri inox
FILTRI INOX
Cartridge stainless steel filter with eccentric closure. Stainless steel deferrizer with eccentric closure and cartridge.
Filter and stainless steel deferrizer with eccentric closure and cartridge.
Accessories
Vibrating sieve
D3018.00
01 | MOTOVIBRATORE 0,1Kw 48V |
03 | MOTOVIBRATORE 0,1Kw 380/440V |
05 | VIBRATORE PNEUMATICO |
VIBRATING SIEVE FOR CERAMIC GLAZE
complete with trolley
Vibrating sieve for ceramic glaze complete with trolley.
Vibrating sieve composed by one stainless steel net complete with trolley on adjustable wheels, motovibrator and upper jet-saver ring.
The diameters 900 and 1200 can be assembled on round base without wheels (upon request).
VIBRATING SIEVE ON TROLLEY
with pneumatic pump for glaze discharge from the mill
Vibrating sieve on trolley with pneumatic pump for glaze discharge from the mill.
Stainless steel trolley on wheels, complete of vibrating sieve with one net.
The product from the vibrating sieve output is sent to a stainless steel tank.
The pump collects the glaze from the tank and lets it available in exit.
In the air version it is installed a 2’’ double diaphragm pneumatic pump with anti-abrasion kit with capacity 500Lts/min water base.
D3086.00
03 | DIAMETRO 900 380/440V PORTATA 30 Qt/h - 120 MESH (COMPLETA DI DEFERIZZATORI 6000 GAUS) |
13 | DIAMETRO 1200 380/440V PORTATA 40 Qt/h -120 MESH (COMPLETA DI DEFERIZZATORI 6000 GAUS) |
23 | DIAMETRO 900 380/440V PORTATA 30 Qt/h -120 MESH |
33 | DIAMETRO 1200 380/440V PORTATA 40 Qt/h 120 MESH |
VIBRATING SIEVE
with recirculation pump on trolley
Vibrating sieve with recirculation pump on trolley.
The machine is used to receive all the glazes returning from the line applications with lower levels than the one of the containing/ discharge tub.
In addition, this machine apply a continuous recirculation of the glaze through a vibrating sieve with reduced mesh.
D3888.00
16 | VIBROSETACCIO | D.600mm | 380V 50Hz |
46 | VIBROSETACCIO | D.900mm | 380V 50Hz |
Accessories
Pumps
AGITATORI BARBOTTINE
cod.D2270
Slow stirrer for slips in underground tank.
QUOTE | TIPO 3 | TIPO 4 | TIPO 7,5 | TIPO 11 | TIPO 15 | TIPO 22 |
A | 370x370 | 370x370 | 460x460 | 630x630 | 630x630 | 950x950 |
B | 772 | 772 | 1200 | 1450 | 1450 | 1735 |
C | 140 | 140 | 260 | 260 | 260 | 260 |
D | 1800 | 2000 | 2800-4000 | 3000-5600 | 3000-5600 | 3300-5600 |
E | 1100-1600 | 1400-2800 | 2000-4000 | 3000-5600 | 3000-5600 | 3500-6000 |
F | 1300-1800 | 1800-3200 | 2300-4400 | 3300-6000 | 3300-6000 | 3800-6500 |
G | 260x260 | 260x260 | 325x325 | 400x400 | 400x400 | 710x710 |
POWER | 3 Kw | 4 Kw | 7,5 Kw | 11 Kw | 15 Kw | 22 Kw |
GIRI/MIN | 16-22 | 16 | 9 | 9 | 9 | 6 |
Mq | 5-15 | 10-18 | 15-50 | 50-75 | 50-100 | 100-150 |
TANK FOR MILLS
Tank group on trolley with pump for mills discharge.
COD. | MOD. | POTENZA /POWER Kw | POLI /POLES | VASCA /BATH | VIBROVAGLIO VIBROSIEVE |
D3084,02 | GVV/03/B | 4 | 4 | 600x950mm | Ø 1200mm |
D3084,12 | GVV/04/C | 7,5 | 4 | 600x950mm | Ø 1200mm |
D3084,22 | GVV/05/C | 9,2 | 4 | 600x950mm | Ø 1200mm |
D3084,32 | GVV/06/B | 15 | 4 | 600x950mm | Ø 1200mm |
D3084,42 | GVV/07/B | 15 | 4 | 600x950mm | Ø 1200mm |
MILL DISCHARGE UNIT
Continuous/ belts drive mill discharge unit.
COD. | MOD. | POTENZA /POWER Kw | POLI /POLES | PREVALENZA mm PREVALENCE mm | PORTATA Lt/min DELIVERY Lt/min |
D1634,02 | GSMC/T/05/B | 7,5 | 4 | 10/13 | 400/700 |
D1634,04 | GSMC/T/05/C | 9,2 | 4 | 10/13 | 400/700 |
D1634,12 | GSMC/T/06/B | 15 | 4 | 15/18 | 600/900 |
D1634,16 | GSMC/T/06/C | 18,5 | 4 | 15/18 | 600/900 |
D1634,24 | GSMC/T/08/C | 18,5 | 4 | 15/18 | 600/900 |
DISSOLVER GROUP ATOMIZED
Dissolver group recollecting atomized.
COD. | MOD. | POTENZA /POWER Kw | POLI /POLES | PORTATA ATOM. DELIVERY ATOM. | DIMENSIONI Ø x H DIMENSION Ø x H |
D1640,02 | GS/03/B | 4 | 4 | 300-400 kg/h | 1000 x 420 |
D1640,12 | GS/04/D | 7,5 | 4 | 400-600 kg/h | 1160 x 470 |
D1640,22 | GS/05/D | 9,2 | 4 | 600-850 kg/h | 1500 x 620 |
D1640,32 | GS/06/C | 15 | 4 | 850-1200 kg/h | 1700 x 700 |
Ricambi
VIBRATING SIEVE FOR POWDERS
Vibrating sieve on trolley for powders.
CODICE CODE | MODELLO MODEL | POTENZA kW POWER kW | RPM | SUPERFICIE VAGLIATE SCREENING SURFACE |
D3230,02 | VCP450/1 | 0,36 | 1500 | 0,105 Mq |
D3230,12 | VCP600/1 | 0,48 | 1500 | 0,265 Mq |
D3230,22 | VCP800/1 | 0,48 | 1500 | 0,245 Mq |
D3230,26 | VCP800S/1 | 0,48 | 1500 | 0,377 Mq |
D3230,32 | VCP900/1 | 0,84 | 1500 | 0,589 Mq |
D3230,42 | VCP1200/1 | 0,84 | 1500 | 0,935 Mq |
VIBRATING SIEVE FOR POWDERS
Powders vibrating sieves for presses.
CODICE CODE | MODELLO MODEL | POTENZA kW POWER kW | RPM | SUPERFICIE VAGLIATE SCREENING SURFACE |
D3240,02 | VPP450 | 0,19 | 3000 | 0,105 Mq |
D3240,12 | VPP600 | 0,42 | 3000 | 0,265 Mq |
D3240,22 | VPP800 | 0,42 | 3000 | 0,425 Mq |
D3240,32 | VPP800S | 0,42 | 3000 | 0,377 Mq |
VIBRATING SIEVE FOR POWDERS
Powders vibrating sieves for presses.
CODICE CODE | MODELLO MODEL | POTENZA kW POWER kW | RPM | SUPERFICIE VAGLIATE SCREENING SURFACE |
D3242,02 | VPPD450 | 0,3 | 1500 | 0,105 Mq |
D3242,12 | VPPD600 | 0,48 | 1500 | 0,265 Mq |
D3242,22 | VPPD800 | 0,48 | 1500 | 0,425 Mq |
D3242,32 | VPPD800S | 0,48 | 1500 | 0,377 Mq |
D3242,42 | VPPD900 | 0,84 | 1500 | 0,589 Mq |
D3242,52 | VPPD1200 | 0,84 | 1500 | 0,935 Mq |
Accessories
Storage
D2260. (versione 48V a richiesta)
20 | DIAM = 1000 | H=1000 mm (700 Lt) | A. 380/440V 50/60 Hz |
21 | DIAM = 1200 | H=1000 mm (1000 Lt) | A. 380/440V 50/60 Hz |
22 | DIAM = 1200 | H=1200 mm (1200 Lt) | A. 380/440V 50/60 Hz |
23 | DIAM = 1500 | H=1000 mm (1600 Lt) | A. 380/440V 50/60 Hz |
24 | DIAM = 1500 | H=1300 mm (2100 Lt) | A. 380/440V 50/60 Hz |
25 | DIAM = 1500 | H=1500 mm (2400 Lt) | A. 380/440V 50/60 Hz |
26 | DIAM = 1850 | H=2000 mm (4900 Lt) | A. 380/440V 50/60 Hz |
27 | DIAM = 2000 | H=2000 mm (5700 Lt) | A. 380/440V 50/60 Hz |
STAINLESS STEEL STIRRER TANK
for glazes “Sirio” model
Stainless steel stirrer tank for glazes “Sirio” model. Stainless steel stirrer tank assembled on a 4 wheels trolley with centrai support far connection motor pump. In the lower part is assembled an antiabrasive rubber coated pump, output tube far connection of 2 lateral tubes controlling the glazes stirring. The electric motor 1,1kw. ls assembled on the centrai support connecting the motor to the pumps impeller through an stainless steel oversize shaft.
D2218.00
01 | DIAM 600 | 48V | CAP.113 LT |
03 | DIAM 600 | 380/440 V | CAP.113 LT |
05 | DIAM 800 | 48V | CAP. 200 LT |
07 | DIAM 800 | 380/440 V | CAP. 200 LT |
09 | DIAM 900 | 48V | CAP. 260 LT |
11 | DIAM 900 | 380/440 V | CAP. 260 LT |
STAINLESS STEEL STIRRER TANK “MASTER” MODEL
with double motorization for heavy glazes
Stainless steel stirrer tank “Master” model with double motorization for heavy glazes. Stainless steel stirrer tank for particularly heavy glazes with viscosity lower than 30 sec. (suitable for engobes/ glazes for bells). The tank is assembled on 4 wheels and is supplied complete with a couple of motors for the stirring and the delivery pump. The 1,5kw motor is used for the rotation of the anti-abrasive rubber coated pump, installed on the lower part of the tank. The second 0,37Kw motor c/with reducer with output turns 20 (22 to 60Hz) keeps the glaze stirred, even when the pump is stopped. On the side of the tank is assembled a stainless steel tube connected with the inside of the main tank for the eventual sieve housing. Total power installed 1,9Kw. The pump’s capacity is of 100Lt/min. Water base, head 4,5mt.
D2228.00
01 | DIAMETRO 900 | 48V |
03 | DIAMETRO 900 | 380/440V |
04 | DIAMETRO 900 | 48V CON COPERTINE C.E. |
06 | DIAMETRO 900 | 380/440V CON COPERTINE C.E. |
13 | DIAMETRO 800 | 380/440V |
16 | DIAMETRO 800 | 380/440V CON COPERTINE C.E. |
23 | DIAMETRO 600 | 380/440V |
26 | DIAMETRO 600 | 380/440V CON COPERTINE C.E. |
STIRRER/PUMP MODEL (H.V.)
For bells/threaders with high viscosity glazes
Stirrer/pump model (H.V.) For bells/threaders with high viscosity glazes Stainless steel stirrer tank for particularly thick glazes (suitable for engobes/glazes for bells) on the cross-girder is installed a couple of motors for the stirring and the feeding of the pump. The 2,2Kw. Motor is meant for the rotation of the pump, covered with anti-abrasive rubber and installed in the lower part of the stirrer. The second motor (of 0,37Kw.) With a reducer with output revolutions 20 (22 to 60Hz.) Is needed to keep the glaze in stirring, even with stopped pump. On the side of the stirrer tank is connected a stainless steel tank, connecting with the inside for possible return of glaze. Total power installed is of 2,6Kw. . The capacity of the pump is of 220Lt./Min. Water-based.
D02229.00
03 | DIAMETRO 900 CAPACITA’ 270LT 380/440V |
06 | DIAMETRO 900 CAPACITA’ 270LT 380/440V CON COPERTINE C.E. |
D2212.00
01 | 48V |
02 | 60V |
03 | 380/440V |
11 | 48V CON COPERTINE C.E. |
12 | 60V CON COPERTINE C.E |
13 | 380/440V CON COPERTINE C.E. |
STAINLESS STEEL STIRRER
for screen printing pastes for silicone decorating machines with pump
Stainless steel stirrer for screen printing pastes for silicone decorating machines with pump Stainless steel stirrer diam. 300/400Mm (depending on the model), installed on trolley with wheels. The stirrer is complete of stainless steel internal rack, covers and geared motor 0,09 / 0,18Kw (depending on the model). It is also equipped with pneumatic pump suitable for the laying distribution of screen printing pastes for silicone rollers.
D02204.00
02 | VERSIONE 48V | 0,18KW | CAPACITÀ 50 LITRI |
04 | VERSIONE 48V | 0,18KW | CAPACITÀ 50 LITRI |
12 | VERSIONE 48V | 0,18KW | CON VALVOLA MANUALE DI COMANDO, CAPACITÀ 50 LITRI |
14 | VERSIONE 48V | 0,18KW | CON VALVOLA MANUALE DI COMANDO, CAPACITÀ 50 LITRI |
32 | VERSIONE 48V | 0,18KW | CAPACITÀ 25 LITRI |
34 | VERSIONE 400V | 0,18KW | CAPACITÀ 25 LITRI |
D2206.00
01 | 0,37Kw | 48V | CAPACITÀ 100 LITRI |
03 | 0,37Kw | 380/440V | CAPACITÀ 100 LITRI |
11 | 0,18Kw | 48V | CAPACITÀ 50 LITRI |
13 | 0,18Kw | 380/440V | CAPACITÀ 50 LITRI |