Stainless steel stirrer tank with rack and base. Composed by a circular tank with stainless steel rack, couple of covers and motoreducer with suitable power. The set is complete with base.

Stainless steel stirrer tank for glazes “Sirio” model. Stainless steel stirrer tank assembled on a 4 wheels trolley with centrai support far connection motor pump. In the lower part is assembled an antiabrasive rubber coated pump, output tube far connection of 2 lateral tubes controlling the glazes stirring. The electric motor 1,1kw. ls assembled on the centrai support connecting the motor to the pumps impeller through an stainless steel oversize shaft.

Stainless steel stirrer tank “Master” model with double motorization for heavy glazes. Stainless steel stirrer tank for particularly heavy glazes with viscosity lower than 30 sec. (suitable for engobes/ glazes for bells). The tank is assembled on 4 wheels and is supplied complete with a couple of motors for the stirring and the delivery pump. The 1,5kw motor is used for the rotation of the anti-abrasive rubber coated pump, installed on the lower part of the tank. The second 0,37Kw motor c/with reducer with output turns 20 (22 to 60Hz) keeps the glaze stirred, even when the pump is stopped. On the side of the tank is assembled a stainless steel tube connected with the inside of the main tank for the eventual sieve housing. Total power installed 1,9Kw. The pump’s capacity is of 100Lt/min. Water base, head 4,5mt.

Stirrer/pump model (H.V.) For bells/threaders with high viscosity glazes Stainless steel stirrer tank for particularly thick glazes (suitable for engobes/glazes for bells) on the cross-girder is installed a couple of motors for the stirring and the feeding of the pump. The 2,2Kw. Motor is meant for the rotation of the pump, covered with anti-abrasive rubber and installed in the lower part of the stirrer. The second motor (of 0,37Kw.) With a reducer with output revolutions 20 (22 to 60Hz.) Is needed to keep the glaze in stirring, even with stopped pump. On the side of the stirrer tank is connected a stainless steel tank, connecting with the inside for possible return of glaze. Total power installed is of 2,6Kw. . The capacity of the pump is of 220Lt./Min. Water-based.

“8” Shaped stainless steel stirrer tank for pastes and glazes “8” shaped stirring tank assembled on trolley, complete with 2 blades, stainless steel shaft and motoreducer 0,37Kw. Capacity 300Lts.

Stainless steel stirrer for screen printing pastes for silicone decorating machines with pump Stainless steel stirrer diam. 300/400Mm (depending on the model), installed on trolley with wheels. The stirrer is complete of stainless steel internal rack, covers and geared motor 0,09 / 0,18Kw (depending on the model). It is also equipped with pneumatic pump suitable for the laying distribution of screen printing pastes for silicone rollers.

Agitatore in acciaio inox diam.400, installato su carrello con ruote.
L’agitatore è completo di rastrelliera interna inox, copertine e motoriduttore da 0,18Kw.